Paradox
Paradox IP180 Ethernet and Wifi Communication Device
Description:
- Paradox IP180 Internet Module to control and monitor a Paradox Control Panel through an IP network.
- Requires No programming but has to be activated by us, see Installation Instructions below
- Connects to the Blue Eye APP, which costs US$50 for 3 Years
- WARNING: If you are connecting the IP180 to your Router using WiFi and if you replace your Router your IP180 will have to be reset and re-configured to your new Router, this may require a Technician
- Uses MQTT technology
- Supports up to 4 receivers
- Has Ethernet and WiFi on board
- Compatible with EVOHD+, SP+, MG+ and most panels manufactured after 2012
- Reports only to IPC10 receivers (does not support reporting to IPRS7/ IPR512)
- Compatible only with BlueEye(does not support Insite Gold), Babywear 5.6.28 and Infield 5.6.22 (and up)
- Does not support static IP connection for now (should be supported in future firmware updates)
- Event log on web interface; displays last 64 events
- Easy installation; built-in clip for mounting in a metal box
- Receive notification of system alarms
- Arm/disarm individual partitions
- View live status of all zones and partitions (e.g., open/ close, arm/disarm, troubles and alarms) via web browser
- Very low bandwidth consumption
- Supported language: English
- Three Year Warranty
Installation Instructions:
Connect the IP180 to the Alarm Panel and Router using a Cable and email or text us with:
- the Site Name
- the Panel Serial Number
- the IP180 Serial Number
- the email address of the Owner
- if you then want to connect using wifi - the Wifi Name and Password
